DOUBLE SHAFT MIXERS

MODEL 21 DSMF

CONSTRUCTION

Mainly mild steel fabrication.

KNIVES

Either one piece type (cast iron or cast steel) which slip on to the keyed shafts, or adjustable pitch NI-HARD which bolt on to round shanks saddle keyed into reamed holes in the shafts.

BEARINGS

Ball bearings throughout, including ball thrust races.

GEARING

Machine cut, running in oil in totally enclosed gear cases.

DRIVES

Motorized through vee belts and clutch to worm gear boxes, flexibility coupled to one knife shaft.

MODEL	TUB SIZES - WIDTH	TUB SIZES - DEPTH	LENGTH	KNIVES	HP	APPROX. PRODUCTION
38 DSMA	38" (965mm)	30" (762mm)	12'0" or 14'0" (3657mm or 4267mm)	ADJUSTABLE Ni-HARD	75	50 tons per hour
29 DSMA	29½" (749mm)	21" (533mm)	12'0" or 14'0" (3657mm or 4267mm)	ADJUSTABLE Ni-HARD	40 to 50	30 tons per hour
29 DSMF	29½" (749mm)	21" (533mm)	12'0" or 14'0" (3657mm or 4267mm)	ONE PIECE C.I. OR STEEL	40 to 50	30 tons per hour
21 DSMF	21" (533mm)	15" (381mm)	8'0" or 10'0" (2438mm or 3048mm)	ONE PIECE C.I. OR STEEL	20 to 25	15 tons per hour